Roof Replacement + Solar in Mission, TX
Mission and Sharyland have a lot of tile and architectural roofs, and mounting solar on those takes more care than on standard shingle. MIBA Energy coordinates roofing and solar in Mission so the array and the roof are engineered as one system.
Local roofing + solar team serving Mission and the surrounding RGV.
Tile roofs — common in Sharyland and the newer Mission subdivisions — need specialized mounting hardware and technique; done wrong, a tile install cracks tiles and creates leaks. When we handle roof and solar together, we can set the mounting properly the first time instead of drilling into a roof someone else installed and hoping the flashing holds. If your roof is due for replacement anyway, doing it alongside solar lets us choose the underlayment and layout with the array already in mind.
HOA neighborhoods add a second layer in Mission. Texas Property Code limits what an HOA can prohibit on solar, but boards can still impose reasonable placement conditions, and a combined roof-and-solar project is easier to submit as a single clean plan. We prepare the HOA submittal and flag up front whether a board is likely to push back on a street-facing array, so the roofing timeline and the approval timeline do not collide.
Sharyland and HOA neighborhoods need both approvals planned together
Mission has a large share of HOA-governed neighborhoods, especially through Sharyland and the newer subdivisions off Shary Road and Bryan Road. Those associations frequently have architectural rules on both roofing material and color and on solar equipment placement. Texas Property Code 202.010 limits how far an HOA can go in restricting solar devices, but it does not stop them from reviewing your submittal — and it says nothing about shingle color.
Doing the roof and the array as one project means one submittal package: roofing material and color plus the array layout, module count, and conduit routing. One review cycle instead of two, and no scenario where the roof color is approved and the panel layout comes back rejected six months later.
Storm and hail damage, and the insurance claim side
A lot of Mission roof-plus-solar projects start with a storm. After a hail or high-wind event, an adjuster inspects, and if the roof is totaled the claim pays to replace it. That is the ideal moment to add solar: the roof is coming off anyway, so the array goes onto a brand-new surface and you never pay to remove panels later.
We work alongside your claim rather than around it. The roof replacement is documented for the carrier as roof scope; the solar is a separate homeowner-funded scope. Keeping those clean is what keeps both the claim and the solar financing straightforward.
Tile versus shingle in Mission
Mission has more clay and concrete tile than most RGV cities, and tile changes the solar conversation. Tile mounts require replacement flashing pieces and tile hooks, individual tiles get lifted and sometimes cut, and the labor is meaningfully higher than composition shingle. It is very doable — we do it — but it needs to be quoted as tile work, not shingle work.
If you are replacing tile with tile, we plan the mount locations before the roof is finished so the flashing goes in with the roof instead of being retrofitted through it. If you are converting to architectural shingle, we walk you through what that does to appearance, HOA approval, cost, and the solar install itself.
Sequencing so both warranties start clean
The order matters. Tear-off, deck repair, and dry-in come first. Then the new roof is completed. Then racking and flashed mounts, modules, inverter, and any Powerwall. Then inspection and AEP Texas interconnection.
Done in that order, your roof warranty is not compromised by someone else drilling through it, and your solar workmanship coverage starts on a roof we know the condition of. One company stands behind both, so there is no finger-pointing if something needs attention in year three.
Roofing + Solar in Mission — common questions
Will my Mission HOA approve solar with a new roof?+
Texas Property Code 202.010 sharply limits an HOA's ability to prohibit solar devices, but associations can still review placement and require a submittal. We prepare one package covering both the roofing material and the array layout so Sharyland-area HOAs review it in a single cycle.
Can I add solar while my hail claim replaces the roof?+
Yes, and it is the best time to do it. The insurance claim covers the roof replacement as its own scope, the solar is homeowner-funded, and because the roof is already coming off you never pay to remove and reinstall panels later.
Can you install solar on a tile roof in Mission?+
Yes. Tile requires tile hooks and replacement flashing, and individual tiles get lifted or cut, so it costs more in labor than composition shingle. We quote tile as tile work and plan mount locations while the roof is being built.
How long does a roof and solar project take in Mission?+
Most Mission projects run one to two weeks on site — roof first, then racking, modules and inverter — followed by city inspection and AEP Texas interconnection approval before the system is switched on.
More about solar in Mission
Roofing + Solar in other RGV cities
Roofing + Solar in Mission?
Get a free, itemized quote from a local Rio Grande Valley team.